HomeDlink Router Admin Login

Dlink Router Admin Login

Dlink Router Admin Login
Dlink Login

You need the IP address, username and password information to access the Dlink management panel of all routers. You can find this information in the Dlink user manual. However, if you are not able to access the user manual of your device, you can take advantage of the summary. You can also download user guides in pdf format for many router brands and models.

Dlink Router Admin Login Guide

Follow the steps below to access the admin panel of your device:

  1. Open your favorite Internet browser (Google Chrome, Mozilla Firefox, Opera, Internet Explorer, etc.).
  2. Type the 192.168.0.1 IP address in the browser address bar and press Enter. If you do not know the default IP address of your router, click here. This page will automatically detect the IP address of your device.
  3. When you connect to the IP address, you will be asked to enter your user and password.
  4. If you don’t know your default username and password, you can use the table below.
  5. After typing your username and password, press Enter. After this process, you will have access to the router admin panel.

I Can’t Login to the Dlink Router Admin Panel

If you cannot access the admin panel using the default login, you can use the list below. Select your device model from the list. You can find other frequently used username and passwords on the model detail page.

Default Username & Passwords for Dlink Routers

You can find the most frequently used default username and password combinations in the Dlink from the bottom table. You can try combinations on this list to log in.

#UsernamePassword
1adminblank
2adminadmin
3blankblank
4blankadmin
5adminpassword
6useruser
7Adminleave blank
8adminrefer to router label
9admintelus
10rootblank
11ipbbxipbbx
12adminSame as network key or WIFI key. Can be found on a
13admin1234
14create in initial setupcreate in initial setup
15blankcreated in initial setup
16adminroot

Default Login IPs for Dlink Routers

You may want to log in to the admin panel for many reasons, such as setting up your device’s internet connection, changing your wireless network or security settings. To do this, you need to know the IP address assigned by the manufacturer to your device. This IP address is usually written on the label on the bottom or the back of the router and in the user manual. If you don’t have access to them, you can find the most frequently used IP addresses in the brand.

#Default Router IP
1192.168.0.1
2192.168.1.1
3192.168.0.50
4192.168.0.99
5192.168.0.20
6192.168.0.30
7192.168.0.10
8192.168.0.32
9192.168.15.1
1010.90.90.90
11192.168.0.35
12192.168.0.40
1310.0.0.1
14192.168.0.101
15192.168.98.170
1610.0.0.2
1710.1.1.1
1810.1.1.3
19192.168.229.61
20192.168.100.1
21unknown
22192.168.254.254
23192.168.1.254
24192.168.11.1

List of Dlink Router Manuals

The Above Methods Didn’t Work!

If you can’t reach the admin panel of your Dlink modem using the above methods, there is only one thing you can do. Press and hold the reset button on the back of the device for 15-20 seconds with a needle or toothpick. As a result of this operation, all the settings of your device will be restored to the factory settings. You will also be disconnected from the Internet. Therefore, if you do not have enough information, you can contact a specialist for technical support.